Performance range
Flow rate: Q=5.4~400 m3/s
Head: H=4-125m
Model Description
Example: IS100-65J-200A
IS - Single stage single suction centrifugal clean water pump
100- suction inlet diameter (mm)
65- Discharge outlet diameter (mm)
J-J represents deceleration for use
200- nominal diameter of impeller (mm)
A-A, B, and C respectively indicate that the outer diameter of the impeller has been cut through the first, second, and third times
Main component materials
The material of the overcurrent components is generally ordinary gray cast iron.
Structural characteristics
The pump is installed horizontally, with horizontal axial suction and upward radial discharge. The pump is a suspension type structure, and during maintenance, the inlet and outlet pipelines do not need to be disassembled to exit the rotor
Repair the components. The pump is connected to the motor through ordinary elastic couplings or extended elastic couplings, and the shaft seal of the pump is sealed with soft packing. The bearing is single row Ball bearings are lubricated with lubricating oil.
Complete range
A complete set of pumps, motors, common bases, couplings, etc. are supplied, as well as bottom valves, check valves, and gate valves.
